AS Enterprises Bearings

Needle Roller Bearings

NKIA 5904 | Combined Ball Roller Bearings

In Stock

NKIA 5903 | Combined Ball Roller Bearings

In Stock

NA 6905 | XIC | Machined Type With IR | NA Series

₨700.00

In Stock

NA 6905

The NA 6905 is a needle roller bearing with a machined inner ring and flanges on the outer ring, designed for applications where high radial load capacity and compact cross-section are required. Its many small-diameter needle rollers provide excellent rigidity and load distribution, which makes this bearing suitable for industrial gearboxes, pumps, electric motors, and other heavy-duty machinery. The design allows for smooth rotation, low friction, and good durability under continuous or heavy loads — ideal where shaft grinding or hardening is impractical. Made of high-grade bearing steel, NA 6905 delivers reliable performance and a long service life when properly lubricated and installed.

NA 4905 | XIC | Machined Type With IR | NA Series

₨550.00

In Stock

NA 4905

The NA 4905 is a single‑row, machined‑ring needle roller bearing with an inner ring and flanged outer ring — built to provide high radial load capacity in applications where radial space is limited. Its dense assembly of fine rollers ensures good load distribution, high stiffness, and smooth rotational performance even under heavy or continuous load. The compact profile and rugged steel construction make it suitable for gearboxes, pumps, automotive components, and general machinery needing reliable and durable bearing support.

NUTR 2562 | Roller Follower Bearings | NUTR Series

₨4,000.00

In Stock

NUTR 2562 — Track Roller / Yoke‑Type Support Roller

The NUTR 2562 is a yoke-type track roller bearing designed for heavy-duty industrial applications, such as cam-follower systems, conveyor guides, and linear motion tracks. It features a 25 mm inner bore, a 62 mm outer diameter, and an overall width of 25 mm, with a 24 mm wide outer ring. Internally, it uses a double-row, full-complement cylindrical roller configuration, providing excellent radial load capacity and resistance to shock. The outer ring has a crowned surface to accommodate minor misalignments, and the bearing comes sealed on both sides, often with provisions for relubrication. It has a basic dynamic radial load rating of approximately 35.8 kN and a static load rating around 48 kN, with a maximum recommended speed of roughly 3200 rpm when grease-lubricated. Its robust construction, high load tolerance, and sealed, ready-to-mount design make the NUTR 2562 ideal for demanding industrial environments requiring durability, reliability, and smooth rolling performance under heavy loads.

NUTR 4090 | Roller Follower Bearings | NUTR Series

₨8,000.00

In Stock

NUTR 4090 — Track Roller / Yoke‑Type Support Roller

The NUTR 4090 is a yoke‑type track roller bearing (support roller) built for heavy‑duty industrial applications such as cam‑follower systems, conveyor tracks, guideways, and other machinery requiring a bearing to run directly on a track or rail. It has a 40 mm bore (inner diameter) and a 90 mm outer (roller) diameter, with a total width of 32 mm (outer‑ring width ~ 30 mm). Internally, the bearing uses a double‑row full‑complement of cylindrical rollers (i.e. many rollers, no cage), which gives it high radial load capacity and good shock resistance. The outer ring has a crowned running surface — this helps the roller to run smoothly on a track and tolerate slight misalignments or tilts.

The NUTR 4090 is supplied sealed on both sides (labyrinth/contact seals), and includes internal lubrication provisions (relubricatable by grease), which increases reliability and life in industrial use. In terms of load‑carrying capability: its basic dynamic radial load rating is roughly 68.2 kN and the static radial load rating around 91.5 kN. Its maximum recommended operating speed under grease lubrication is about 1,600–1,800 rpm, reflecting the full‑complement design (which tends to limit high‑speed capability but improves load capacity and durability).

Because of these characteristics — thick‑walled outer ring, crowned surface, full‑complement rollers, seals and relubrication — NUTR 4090 is ideal where high radial loads, durability, long life and smooth track‑rolling under heavy load are required. Typical applications include conveyors, cam‑drives, linear guides, material‑handling equipment, printing or packaging machines, and other industrial systems where parts roll or slide on tracks rather than rotate on a shaft.

CF 18 | Cam Follower Bearing | CF Series

₨1,500.00

In Stock

CF 5 B | Cam Follower Bearing | CF Series

₨1,000.00

In Stock

Cylindrical Roller Bearing

SL 04 5010 PP | Cylindrical Roller Bearings (Full Complement, Double Row)

₨8,500.00

In Stock

SL04 5010 PP

The SL04 5010 PP is a heavy-duty double-row cylindrical roller bearing designed for applications that require superior radial load capacity and long-term reliability. With a 50 mm inner diameter, 80 mm outer diameter, and 40 mm width, it provides a compact yet sturdy solution for industrial machinery and mechanical systems. Its full-complement design maximizes the number of rollers, ensuring excellent radial load distribution and rigidity under heavy or continuous-duty operations. The PP double-sided contact seals protect the internal rollers and raceways from dust, moisture, and other contaminants, enhancing durability and reducing maintenance requirements. A snap-ring groove on the outer ring allows secure axial positioning in housings. SL04 5010 PP is ideal for gearboxes, pulleys, sheaves, conveyor systems, and other heavy-duty equipment where high radial loads and reliable, low-maintenance operation are essential.

SL 04 5005 PP | Cylindrical Roller Bearings (Full Complement, Double Row)

₨5,000.00

In Stock

SL 04 5005 PP

The SL 04 5005 PP is a compact yet durable double-row, full-complement cylindrical roller bearing designed for applications requiring high radial load capacity in a small footprint. With a 25 mm bore, 47 mm outer diameter, and 30 mm width, it is suitable for small to medium-sized industrial machinery, pulleys, sheaves, and gearboxes. Its full-complement design maximizes the number of rollers, providing excellent radial rigidity and even load distribution under heavy loads. The PP double-sided contact seals protect the internal rollers and raceways from dust, moisture, and contaminants, extending service life and reducing maintenance. The snap-ring groove on the outer ring allows secure axial positioning in housings. With a dynamic load rating of approximately 44.5 kN and a static rating of 60 kN, and a limiting grease-lubricated speed of around 4,700 rpm, the SL 04 5005 PP is ideal for reliable, sealed, heavy-load radial applications.

NU 307 ECP | SDKF | Single-Row Cylindrical Roller Bearings

₨1,550.00

In Stock

NU 208 ECP | SDKF | Single-Row Cylindrical Roller Bearings

₨1,550.00

In Stock

Angular Contact Ball Bearings

25TAC62BSUC10PN7B | Ball Screw Support Bearing

₨3,800.00

In Stock

The 25TAC62BSUC10PN7B is a premium angular contact thrust ball bearing designed for high-precision ball screw support. Engineered with a 60° contact angle, it provides exceptional axial load capacity, high rigidity, and smooth rotation—making it ideal for CNC machines, machining centers, and other precision industrial equipment.

This bearing is built to deliver stable performance under demanding conditions, offering low friction, reduced vibration, and long operating life. Its open design allows for efficient lubrication and reliable heat dissipation, ensuring consistent accuracy and durability during continuous operation.

If you’re looking for a dependable ball screw support bearing that enhances machine precision and overall productivity, the 25TAC62BSUC10PN7B is an excellent choice for modern automation and motion-control systems.

30TAC62BSUC10PN7B | Ball Screw Support Bearing

₨4,200.00

In Stock

The 30TAC62BSUC10PN7B is a premium angular contact thrust ball bearing designed for high-precision ball screw support. Engineered with a 60° contact angle, it provides exceptional axial load capacity, high rigidity, and smooth rotation—making it ideal for CNC machines, machining centers, and other precision industrial equipment.

If you’re looking for a dependable ball screw support bearing that enhances machine precision and overall productivity, the 30TAC62BSUC10PN7B is an excellent choice for modern automation and motion-control systems.

7210 BECBP | SDKF | Single-Row | Angular Contact Ball Bearings

₨2,450.00

In Stock

The SDKF 7210 BECBP is a high-quality angular contact ball bearing designed to deliver reliable performance in demanding industrial applications. Built with a 40° contact angle, it provides excellent axial and radial load capacity, making it ideal for machine tool spindles, pumps, compressors, electric motors, and high-speed machinery.

Its optimized internal design ensures smooth rotation, reduced friction, and stable performance even under heavy loads or continuous operation. The SDKF 7210 BECBP also offers low vibration and enhanced durability, helping maintain precision and efficiency in critical equipment.

Whether used for replacements or new installations, the SDKF 7210 BECBP is a dependable choice for operations requiring accuracy, strength, and long service life.

3205 2RS | SDKF | Double-Row | Angular Contact Ball Bearings

₨750.00

In Stock

One Way Lock Bearings

CSK 40 PP | One Way Lock Bearing

₨4,200.00

In Stock

CSK 408018 PP | One Way Lock Bearing

Out of stock

ASNU 25 | Heavy Duty Clutch Bearings | ASNU

₨6,200.00

In Stock

HFL 2026 (FCB-20) | One way Lock Bearings | Drawn Cup Roller Clutch | HFL Series

₨400.00

In Stock

Rod End Plain Bearings

Plain Bearings

GE 50 ES 2RS | XIC | Radial Spherical Bearings

₨1,350.00

In Stock

GE 50 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
GE 50 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.

GE 20 ES 2RS | XIC | Radial Spherical Bearings

₨300.00

In Stock

GE 20 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
GE 20 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.

PB 18 | Spherical Plain Bearing (Rod End Type Insert)

₨3,500.00

In Stock

PB 18

The PB 18 is a robust spherical plain bearing designed to accommodate both rotational and angular motion while supporting substantial radial loads. With an 18 mm bore, 42 mm outer diameter, and 23 mm overall width, it offers a compact yet sturdy profile suitable for mechanical linkages, pivots, suspension arms, and oscillating components. Its spherical inner design allows tilting or angular misalignment up to approximately 15°, making PB 18 especially useful in assemblies where alignment varies during motion. Constructed from high-carbon steel and bearing-grade materials, PB 18 provides high strength and durability under demanding operational conditions. With a dynamic load capacity of around 25,700 N, this bearing is ideal for heavy-duty applications where reliability, smooth articulation, and resistance to wear are required, such as in agricultural machinery, industrial linkages, hydraulic systems, and mechanical suspension components.

PB 10 | Spherical Plain Bearing (Rod End Type Insert)

₨1,500.00

In Stock

PB 10

The PB 10 is a compact spherical plain bearing designed to allow smooth rotational and slight angular motion between a shaft and housing while supporting moderate radial loads. With a 10 mm bore, 26 mm outer diameter, and 14 mm width, this bearing is suitable for small to medium-sized mechanical linkages, pivots, or oscillating joints. Its steel outer ring combined with a hardened spherical inner ring ensures durability and wear resistance under load. PB 10 is well-suited for light machinery, linkage systems, pneumatic or hydraulic actuators, or any mechanical system where compact spherical plain bearings are required.

LM 80 UU | XIC | Linear Motion Bearing | LM Series

₨11,800.00

In Stock

The LM80UU is a heavy-duty linear motion ball bearing designed for smooth, accurate, and low-friction movement along an 80 mm precision shaft. Built from hardened bearing steel, it features multiple recirculating ball circuits that provide excellent load capacity and rigidity, making it ideal for industrial automation, CNC machinery, packaging systems, and heavy linear motion equipment. Its double-sealed “UU” design helps keep dust and contaminants out, ensuring long life and reliable operation even in demanding environments. With its large inner diameter and robust construction, the LM80UU delivers stable, precise linear travel for high-load and long-stroke applications.

ST 25 B | Linear Motion Bearing | ST-B

₨3,500.00

In Stock

ST 254055 B

The ST 25 B is a compact linear ball bushing designed for smooth, low‑friction linear motion along a 25 mm diameter shaft. With a 25 mm bore, 40 mm outer diameter, and length of 55 mm, it offers a small‑footprint yet dependable solution for linear guide systems, CNC machines, automation equipment, and other mechanical setups requiring precise, repeatable linear travel. Inside the bearing sleeve, rows of hardened steel balls circulate to provide smooth, accurate sliding motion with minimal resistance, which helps extend shaft and bearing life. With a dynamic load capacity around 3,600 N and a static load rating near 4,700 N, ST 25 B is suitable for light to moderate loads and frequent motion cycles. Its compact size and modest weight make it ideal for applications where space is limited but reliable linear motion is essential.

LME 20 UU | XIC | Linear Motion Bearing | LME Series

₨450.00

In Stock

LME 20 UU (Linear Motion Bearing)

The LME 20 UU is a linear‑ball bearing (linear bushing) designed to slide smoothly along a 20 mm shaft, providing precise, low‑friction linear motion. Its bore (inner diameter) is 20 mm, and the outer diameter is 32 mm, with a total length (along the shaft) of 45 mm. Internally it contains five rows of steel balls held in a polymer (plastic) retainer, which roll along the shaft on precision‑ground raceways. The “UU” designation means the bearing is sealed on both ends with rubber/contact seals — this helps keep out dust, dirt, and moisture, thereby extending operational life and reducing maintenance. The outer housing is hardened steel for strength and durability, making it suitable for repeated use under load. In terms of load capacity, LME 20 UU has a basic dynamic load rating around 862 N and a basic static load rating around 1370 N. Because of its moderate size, smooth motion, and sealed design, LME 20 UU is commonly used in equipment like CNC machines, 3D printers, automation systems, linear actuators, and other machinery requiring stable, shaft‑guided linear motion.

LM 25 LUU | XIC | Linear Motion Bearing | LM Series

₨1,400.00

In Stock

Linear Guideways

HGH 35 CA | ASE | Linear Guideway Block

₨7,500.00

In Stock

The HGH 35 CA is a heavy-duty linear guide block designed for use on a 35 mm linear rail, commonly found in CNC machines, automation systems, and precision equipment. It features a rigid, square-type carriage with four rows of recirculating steel balls that contact the rail at four points, giving it high load capacity and excellent resistance to forces from multiple directions. This design provides smooth, precise linear motion with low friction and minimal deflection under load. The block is compact yet robust, making it suitable for medium-to-heavy mechanical loads, and includes threaded mounting holes on top for secure attachment to machine components. Overall, the HGH 35 CA is known for durability, stability, and precision in demanding linear-motion applications.

HGW 15 CA | ASE | Linear Guideway Block

₨3,600.00

In Stock

The HGW 15 CA is a heavy-duty linear guide block designed for use on a 15 mm linear rail, commonly found in CNC machines, automation systems, and precision equipment. It features a rigid, square-type carriage with four rows of recirculating steel balls that contact the rail at four points, giving it high load capacity and excellent resistance to forces from multiple directions. This design provides smooth, precise linear motion with low friction and minimal deflection under load. The block is compact yet robust, making it suitable for medium-to-heavy mechanical loads, and includes threaded mounting holes on top for secure attachment to machine components. Overall, the HGW 15 CA is known for durability, stability, and precision in demanding linear-motion applications.

MGN 15 C | ASE | Miniature Linear Guide Ways

₨2,400.00

In Stock

The MGN 15 C is a miniature linear guide block from the “MG” series, designed for light- to moderate-load precision applications. Its compact, narrow design makes it ideal for equipment where space is limited, such as 3D printers, light-duty CNC machines, robotics, and measuring instruments. The block features a Gothic-arch contact geometry that provides high stiffness and rigidity against moment loads from all directions while keeping size and weight minimal.

The MGN 15 C has a block width of approximately 32 mm, a height of about 16 mm, and runs on a 15 mm wide rail. Its lightweight design, around 0.06 kg, reduces inertia, making it easier to drive with low-power motors or actuators. The block uses rolling steel balls retained by a cage, which ensures smooth, low-friction motion and prevents ball displacement during assembly or maintenance.

Overall, the MGN 15 C combines a compact footprint, good rigidity, low weight, and smooth linear motion, making it well-suited for small or lightweight automated systems where precision and space efficiency are essential.

HSR25A1UU(GK) Block

In Stock

The THK HSR25A1UU linear guide is a high-precision linear motion system designed for smooth, stable, and low-friction movement in industrial machinery and automation equipment. It features a 25-series rail with a block measuring approximately 70 mm in width, 36 mm in height, and 83.1 mm in length, providing a robust solution for heavier loads and larger machines compared to smaller series guides.

The block contains multiple recirculating ball bearings arranged in four rows within precision-ground raceways, allowing the balls to circulate smoothly and deliver consistent linear motion. This four-way contact design ensures balanced load capacity in all directions—radial, reverse-radial, and lateral—enabling the guide to support complex loads while maintaining high accuracy and stability. The internal geometry also allows for minor self-adjustment, compensating for small installation misalignments to ensure smooth operation.

The HSR25A1UU is built for durability and long service life, making it ideal for demanding applications such as CNC machines, milling and grinding equipment, robotic systems, and automated assembly lines. Its compact yet strong design reduces friction and drive power requirements while providing precise, repeatable motion. This combination of high load capacity, rigidity, and reliability makes the HSR25A1UU an efficient and versatile choice for both industrial-scale machinery and precision engineering projects.

SFU 3205-4 | ASE | CNC Ball Screw | Standard Ball Nut

Out of stock

SFU 3505-4 Ball Screw Nut
The SFU 3505-4 Ball Screw Nut is a high-precision linear-motion component engineered for heavy-duty CNC machinery, industrial automation systems, and equipment requiring smooth, accurate, and repeatable linear positioning. Designed to work with a 35 mm diameter screw and a 5 mm lead, it provides stable, efficient linear travel with very low friction, making it suitable for applications that demand both high load capacity and consistent motion control. Manufactured from hardened alloy steel, the nut offers exceptional strength, wear resistance, and long service life even under continuous or high-stress operation. Its multi-circuit internal recirculation design reduces backlash, improves rigidity, and enhances overall positioning accuracy, ensuring reliable performance in precision-critical environments. Compatible with standard ball-screw supports and mounting blocks, the SFU 3505-4 Ball Screw Nut is an excellent choice for machine builders, CNC retrofitters, and automation engineers seeking robust, accurate, and durable linear-motion performance

SFU 2005-4 | ASE | CNC Ball Screw | Standard Ball Nut

Out of stock

SFU 2005-4 Ball Screw Nut

The SFU 2005-4 Ball Screw Nut is a high-precision linear motion component designed for CNC machines, automation systems, and industrial equipment requiring smooth, accurate, and repeatable movement. Designed to operate on a 20 mm diameter screw with a 5 mm lead, it delivers efficient linear displacement with very low friction, making it suitable for both moderate-speed and moderate-load applications. Constructed from hardened alloy steel, the nut offers excellent durability, wear resistance, and long service life under continuous operation. Its 4-circuit internal recirculation design provides improved rigidity and reduced backlash, ensuring stable positioning accuracy even in demanding environments. Compatible with standard ball-screw supports and mounting blocks, the SFU 2005-4 Ball Screw Nut is a reliable choice for builders, machinists, and automation engineers who need precision and stability in their linear-motion systems.

SFU 1610-4 | ASE | CNC Ball Screw | Standard Ball Nut

Out of stock

SFU 1610-4 Ball Screw Nut

The SFU 1610-4 Ball Screw Nut is a precision linear‑motion component ideal for CNC machines, 3D printers, automation equipment, and other mechanical systems where smooth, repeatable linear displacement is important. It works with a 16 mm screw shaft and provides a 10 mm linear advance per revolution, enabling fast motion along the axis. The nut uses an internal ball‑recirculation design (with 4 circuits, as indicated by “‑4”) that reduces friction and backlash, improving rigidity, responsiveness, and positioning accuracy — which is especially useful under load or during frequent motions. Built from hardened alloy or bearing steel, the nut is durable and wear‑resistant even under prolonged or heavy use, giving a long service life in demanding environments. Its flanged-nut design and standard mounting provisions make it compatible with common bearing blocks and support units, simplifying integration into machines and automation frames.

SFU 4010-4 | ASE | CNC Ball Screw | Standard Ball Nut

Out of stock

SFU 4010-4 Ball Screw Nut

The SFU 4010-4 Ball Screw Nut is a heavy-duty, high-capacity linear-motion component suited for industrial and CNC applications where high load-bearing capability, long travel, and fast linear displacement are required. Designed for a 40 mm diameter screw shaft with a 10 mm lead, each revolution moves the nut 10 mm along the shaft — enabling rapid long-axis movement for heavy loads. The nut’s design includes an internal ball recirculation system (4‑circuit) that ensures smooth, low-friction motion with reduced backlash and enhanced rigidity, even under high loads or during frequent motion cycles. Made from hardened alloy steel, both screw and nut are built for durability and longevity. Its robust dimensions and mounting compatibility make SFU 4010-4 ideal for heavy CNC machines, large‑scale automation equipment, industrial positioning tables, and any application demanding high stiffness, reliability, and efficient linear motion under load.

Our Good Customers

Meet the People Who Trust Us to Make a Difference Every Day

Our Brands

We are a trusted bearings company committed to delivering high-performance, durable, and precision-engineered solutions for industries worldwide. With a focus on quality, reliability, and innovation, we ensure our bearings keep your machines running smoothly, efficiently, and without interruption.

z

z

Needle Roller Bearings

Tools & Equipment

NKIA 5904

NKIA 5903

Cylindrical Roller Bearing

Tools & Equipment

SL04 5010 PP

SL 04 5005 PP

Angular Contact Ball Bearings

Tools & Equipment

One Way Lock Bearings

Tools & Equipment

HFL 2026

Rod End Plain Bearings

Tools & Equipment

Plain Bearings

Tools & Equipment

PB 18

PB 10

Linear Motion Bearings

Tools & Equipment

ST 254055 B

Linear Guideways

Tools & Equipment

CNC Ball Screws

Tools & Equipment

SFU 2005-4 Ball Screw Nut

SFU 1610-4 Ball Screw Nut

SFU 4010-4 Ball Screw Nut

Our Good Customers

Our Brands

Categories

Contact Us

Address

Opening Hours

Follow Us

Copyright 2025 © AS Enterprises Bearings

Copyright 2025 © AS Enterprises Bearings

SL 04 5005 PP