PB 6
The PB 6 is a miniature spherical plain bearing designed for small-shaft applications where compact size and smooth rotation with angular accommodation are required. With a 6 mm bore, 18 mm outer diameter, and 9 mm width, PB 6 is ideal for very compact linkages, small actuators, or light mechanical pivots. It supports a dynamic radial load of approximately 4.3 kN and a static radial load of around 9.8 kN, sufficient for light-load conditions or delicate link mechanisms. The bearing’s hardened inner spherical ring and durable outer ring provide reliable sliding contact and resistance to wear, even during repeated cycles of motion. PB 6 is especially useful for small-scale automation, mechanical linkages, or lightweight pivot joints where space is limited but smooth, stable movement is critical.
PB 8
The PB 8 is a small spherical plain bearing suitable for light to moderate radial loads and small-shaft applications. With an 8 mm bore, 22 mm outer diameter, and 12 mm width, it fits in tight spaces while offering reliable rotational and angular motion. It supports a dynamic radial load around 6.8 kN and a static radial load near 16 kN, making it appropriate for small linkages, hinges, or pivot points in machinery, automation systems, or light mechanical assemblies. Its steel outer ring and hardened inner spherical surface provide durability and stable sliding contact, even under repeated motion. PB 8 is particularly useful where compact size and smooth pivoting under load are needed.
PB 10
The PB 10 is a compact spherical plain bearing designed to allow smooth rotational and slight angular motion between a shaft and housing while supporting moderate radial loads. With a 10 mm bore, 26 mm outer diameter, and 14 mm width, this bearing is suitable for small to medium-sized mechanical linkages, pivots, or oscillating joints. Its steel outer ring combined with a hardened spherical inner ring ensures durability and wear resistance under load. PB 10 is well-suited for light machinery, linkage systems, pneumatic or hydraulic actuators, or any mechanical system where compact spherical plain bearings are required.
PB 18
The PB 18 is a robust spherical plain bearing designed to accommodate both rotational and angular motion while supporting substantial radial loads. With an 18 mm bore, 42 mm outer diameter, and 23 mm overall width, it offers a compact yet sturdy profile suitable for mechanical linkages, pivots, suspension arms, and oscillating components. Its spherical inner design allows tilting or angular misalignment up to approximately 15°, making PB 18 especially useful in assemblies where alignment varies during motion. Constructed from high-carbon steel and bearing-grade materials, PB 18 provides high strength and durability under demanding operational conditions. With a dynamic load capacity of around 25,700 N, this bearing is ideal for heavy-duty applications where reliability, smooth articulation, and resistance to wear are required, such as in agricultural machinery, industrial linkages, hydraulic systems, and mechanical suspension components.
-
GE 15 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 15 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 17 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 17 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 20 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 20 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 25 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 25 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 30 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 30 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 35 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 35 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 40 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 40 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 45 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 45 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 50 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 50 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 55 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 55 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
-
GE 60 ES 2RS is a radial spherical plain bearing — meaning the inner ring has a spherical (convex) outer surface and the outer ring a matching concave surface. This lets it self-align, accommodating shaft misalignment, tilting or oscillating motion between the shaft and housing.
-
Its construction uses steel-on-steel sliding surfaces (inner and outer rings from high-carbon chromium bearing steel), giving high load capacity, good wear resistance, and strong performance under heavy, static, shock or alternating loads.
-
The “2RS” designation indicates the bearing has double-lip rubber seals on both sides, helping prevent dust, dirt, and moisture ingress — useful in dirty or humid environments — while protecting internal surfaces.
-
It also includes lubrication provisions (lubrication groove and holes), allowing relubrication to maintain smooth operation and prolong service life under load or oscillating motion.
-
GE 60 ES 2RS is built for heavy-duty applications where self-alignment, durability, and load-bearing capacity matter more than high–speed rotation — for example in hydraulic cylinders, heavy machinery linkages, suspension or pivot joints, and industrial equipment where movement or misalignment occurs.
Categories
Contact Us
0092-340-8354886
0092-302-1953238
Address
AS ENTERPRISES 26, Manzoor Square , Plaza Quarters , M.A. Jinah Rd , Karachi. Pakistan
