HFL 2026
The HFL 2026 is a shell‑type one‑way needle roller bearing / clutch that functions similarly to HF series bearings but includes a drawn cup outer shell for press‑fit mounting. It permits rotation in one direction while locking in the other, making it ideal for overrunning clutches, backstops, indexing mechanisms, and applications with radial loads. Its shell design helps with easy installation into housings or assemblies where a press‑fit is required.
HF 2016
The HF 2016 is a one‑way needle roller bearing (roller clutch) designed to allow rotation in one direction while locking and preventing rotation in the opposite direction. It is compact and radially slim, making it suitable for torque transmission, overrunning clutch applications, indexing mechanisms, and similar systems where controlled directional motion is required. It uses needle rollers and a spring or cage assembly to engage under load and transmit torque efficiently.
NUTR 4090 — Track Roller / Yoke‑Type Support Roller
The NUTR 4090 is a yoke‑type track roller bearing (support roller) built for heavy‑duty industrial applications such as cam‑follower systems, conveyor tracks, guideways, and other machinery requiring a bearing to run directly on a track or rail. It has a 40 mm bore (inner diameter) and a 90 mm outer (roller) diameter, with a total width of 32 mm (outer‑ring width ~ 30 mm). Internally, the bearing uses a double‑row full‑complement of cylindrical rollers (i.e. many rollers, no cage), which gives it high radial load capacity and good shock resistance. The outer ring has a crowned running surface — this helps the roller to run smoothly on a track and tolerate slight misalignments or tilts.
The NUTR 4090 is supplied sealed on both sides (labyrinth/contact seals), and includes internal lubrication provisions (relubricatable by grease), which increases reliability and life in industrial use. In terms of load‑carrying capability: its basic dynamic radial load rating is roughly 68.2 kN and the static radial load rating around 91.5 kN. Its maximum recommended operating speed under grease lubrication is about 1,600–1,800 rpm, reflecting the full‑complement design (which tends to limit high‑speed capability but improves load capacity and durability).
Because of these characteristics — thick‑walled outer ring, crowned surface, full‑complement rollers, seals and relubrication — NUTR 4090 is ideal where high radial loads, durability, long life and smooth track‑rolling under heavy load are required. Typical applications include conveyors, cam‑drives, linear guides, material‑handling equipment, printing or packaging machines, and other industrial systems where parts roll or slide on tracks rather than rotate on a shaft.
NUTR 40 — Track Roller / Yoke‑Type Support Roller
The NUTR 40 is a yoke‑type track roller bearing (support‑roller / track‑roller) built for heavy‑duty industrial applications where parts run on tracks or guides. It has a 40 mm inner bore, an 80 mm outer (roller) diameter, and a total width of 32 mm (with the outer‑ring width around 30 mm). Internally, it uses a double‑row, full‑complement of cylindrical rollers (i.e. many rollers without a cage), which grants it high radial load capacity. The outer ring has a crowned running surface, and the bearing comes sealed on both sides (labyrinth‑seal or shielded), often pre‑lubricated — and in many versions it supports relubrication via the inner ring. The basic radial load ratings for NUTR 40 are on the order of 56–57 kN dynamic and 80 kN static, and the bearing can handle permissible dynamic radial loads around 31 kN under continuous operation. Its design — thick‑walled outer ring, sealed full‑complement rollers, crowned surface — allows it to tolerate heavy radial loads, some axial or skew loads (from misalignment or tilting), and to perform reliably in conveyor systems, cam‑follower assemblies, guide‑rails, linear motion tracks and other heavy‑duty industrial machinery where durability and smooth track‑rolling under load are needed.
NUTR 3072 — Track Roller / Yoke‑Type Support Roller
The NUTR 3072 is a yoke‑type track roller bearing designed for heavy‑duty cam, guide‑way or conveyor‑type industrial applications. It has a 30 mm inner bore, a 72 mm outside (roller) diameter and an overall width of 29 mm (outer‑ring width ~28 mm). Internally it uses a double‑row, full‑complement cylindrical roller set (i.e. many rollers without a cage) which gives it high radial load capacity and good resistance to shock and wear. The outer ring has a crowned running surface, helping ensure smooth movement and allowing some misalignment or skew between shaft and track. Like other NUTR rollers, it’s supplied sealed with labyrinth‑type seals on both sides, and includes a lubrication hole in the inner ring so it can be relubricated for extended life. Load‑rating data for NUTR 3072 shows a basic dynamic radial load capacity around 48.4 kN, and a basic static radial load capacity around 61 kN. Typical applications include cam‑follower systems, conveyor and guide‑rail systems, linear motion tracks, and other heavy‑duty industrial machinery where durability, reliability, and smooth rolling performance under load are required.
NUTR 2562 — Track Roller / Yoke‑Type Support Roller
The NUTR 2562 is a yoke-type track roller bearing designed for heavy-duty industrial applications, such as cam-follower systems, conveyor guides, and linear motion tracks. It features a 25 mm inner bore, a 62 mm outer diameter, and an overall width of 25 mm, with a 24 mm wide outer ring. Internally, it uses a double-row, full-complement cylindrical roller configuration, providing excellent radial load capacity and resistance to shock. The outer ring has a crowned surface to accommodate minor misalignments, and the bearing comes sealed on both sides, often with provisions for relubrication. It has a basic dynamic radial load rating of approximately 35.8 kN and a static load rating around 48 kN, with a maximum recommended speed of roughly 3200 rpm when grease-lubricated. Its robust construction, high load tolerance, and sealed, ready-to-mount design make the NUTR 2562 ideal for demanding industrial environments requiring durability, reliability, and smooth rolling performance under heavy loads.
NUTR 1747 — Track Roller / Yoke‑Type Support Roller
The NUTR 2052 is a yoke-type track roller bearing designed for heavy-duty industrial applications where components follow cams or run along tracks. It features a double-row full-complement of cylindrical rollers within a thick outer ring, providing excellent radial load capacity and resistance to shock. The bearing has a 20 mm inner bore, a 52 mm outer diameter, and an overall width of 25 mm. Its outer surface is crowned to accommodate minor misalignments, and it comes sealed on both sides, often pre-lubricated, with some variants allowing for relubrication. Constructed from hardened bearing steel, it is capable of handling dynamic radial loads of approximately 31.9 kN and static radial loads around 39 kN, with a maximum recommended rotational speed of roughly 3800 rpm. NUTR 2052 bearings are commonly used in cam-follower systems, conveyor guideways, linear motion tracks, and other industrial machinery where durability, high load capacity, and reliability under repeated rolling contact are critical. Their robust design, high load tolerance, and ready-to-mount sealed configuration make them ideal for harsh or high-stress environments.
NUTR 1747 | Roller Follower Bearings | NUTR Series
NUTR 1747 — Track Roller / Yoke‑Type Support Roller
The NUTR 1747 is a yoke‑type track roller bearing (support/track roller) with an inner ring and sealed outer ring — ready to install without requiring a hardened shaft. It is built around a full‑complement, double‑row cylindrical‑roller assembly and a thick‑walled outer ring with a crowned running surface, which helps the bearing tolerate misalignment or skew and operate smoothly even under heavy radial loads or shock loads. Because the bearing is sealed and includes a lubrication‑hole in the inner ring, it’s well‑suited for conveyor rails, cam‑drives, guide‑rails and general track‑guided mechanical applications, offering high load capacity, reliable long service life, and easy maintenance.
NUTR 1542 — Track Roller / Yoke‑Type Support Roller
The NUTR 1542 is a yoke‑type track roller bearing (support roller) designed to ride directly on tracks or rails — rather than on a shaft — making it especially suitable for cam drives, conveyor systems, guide‑rails, and other track‑guided mechanical assemblies. It uses a double‑row full‑complement cylindrical roller set together with a thick‑walled outer ring that features a crowned running surface, which helps distribute load evenly and allows the bearing to tolerate slight misalignment, skew or tilting. The bearing comes sealed and ready for mounting, with the inner ring containing a lubrication hole for easy relubrication and a flanged outer ring that offers axial guidance and enhanced reliability under heavy load or continuous operation. Its robust construction delivers high radial load capacity, stable rolling motion, and long service life even under demanding conditions.
NUTR 30 — Track Roller / Yoke‑Type Support Roller
The NUTR 30 is a heavy‑duty, double‑row yoke‑type track roller (support roller) — designed to run directly on a track or rail rather than on a shaft. Its thick‑walled outer ring with a crowned running surface, full‑complement cylindrical rollers, and sealed design make it ideal for applications like conveyor systems, cam drives, guide‑rails, and other track‑guided machinery where high radial loads, shock loads, or misalignment can occur. The roller is ready to mount and features internal axial guidance, good resistance to wear, and long service life even under continuous heavy loading
NUTR 25 — Track Roller / Yoke‑Type Support Roller
The NUTR 25 is a yoke‑type track roller bearing (support roller) with a full‑complement, double‑row cylindrical roller set and thick‑walled outer ring, designed to run directly on a track or rail rather than on a shaft. Its crowned outer‑ring surface improves load distribution and reduces stress concentrations, making it especially suitable for conveyor systems, cam drives, guide‑rails, and other heavy‑duty or continuous‑use track‑based applications. Sealed and ready‑to‑mount with flange rings for axial guidance, NUTR 25 offers high radial load capacity, good resistance to misalignment or skew, and reliable long‑term performance even under heavy loads.
Categories
Contact Us
0092-340-8354886
0092-302-1953238
Address
AS ENTERPRISES 26, Manzoor Square , Plaza Quarters , M.A. Jinah Rd , Karachi. Pakistan
